CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN

// CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN - vinh dự là nhà phân phối các sản phẩm cơ điện tử - điện lạnh uy tín tại Việt Nam //

Hỗ trợ khách hàng :

0933.707.707 Hỗ trợ trực tuyến :

Mạng Xã Hội:

Tỉ Giá Ngoại Tệ :

Thống Kê Truy Cập :

Users on page

Now online: 1
Hôm Nay: 22
Tuần Này: 140
Tổng Lượt Xem: 29099


( Rê chuột để phóng lớn )

Van cân bằng Kombi-F V6000D

Model : V6000D Series

Xuất Xứ : Liên hệ

Tình Trạng : Liên hệ

Giá Bán : Liên hệ

Bảo Hành : 12 tháng

Để có được giá tốt nhất, quý khách vui lòng liên hệ 0933.707.707 gặp Mr Lãm

MÔ TẢ SẢN PHẨM :

V6000D Kombi-F-II, Kombi-F
FLANGED BALANCING AND SHUTOFF VALVES
Van căn bằng tay Kombi F & F – II

Design
• Valve body with flanges drilled to DIN, PN 16
• Valve insert with handwheel and pre-setting display
• 2 Pressure test cocks
Materials
• Valve housing made of cast iron GG25, painted blue
• Valve insert made of stainless steel with seat sealing made
of PTFE
• Pressure test cocks made of brass
• DN15-50: Handwheel made of black plastic (Grivory GV5H)
DN65 and higher: handwheel made of steel, painted black
• Fairing made of plastic, black
Application
The hydronic balance is a significant requirement for the
efficient operation of a hydronic heating or cooling installation.
In an unbalanced system under or over provision of hot water
to individual radiators or circuits can occur. Apart from the
correct selection of radiator valves, regulation of individual
circuits is also necessary and in some cases, such as in
DIN 18 380, VOB part C, required by national standards.
This requirement is met with Kombi-F-II and Kombi-F shutoff
and balancing valves.
Kombi-F-II and Kombi-F have functions shut-off, pre-setting
and measuring.
Features
• Balancing through stroke limitation with digital presetting and visible pre-setting indicator
• Equipped with 2 pressure test cocks for differential
pressure measurement
• Non rising spindle with EDD (double sealed by
EDD sealing)
• Pre-setting isn`t altered when handwheel is turned
• Stroke limitation-screw protected by protection cap
• PTFE-seat sealing
• Spindle made of stainless steel
• Valve body made of corrosion resistant cast iron
• Available in dimensions up to DN400

Specifications Please Note:
• To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial operation
with all valves fully open
• Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
• Please contact us if you should have any special requirements or needs
Medium Water, water-glycol mixture
Operating temperature -10…120°C (14…248°F)
short run 130°C (266°F)
Operating pressure max. 16 bar (232 psi)
kvs(cv)-values see table below and flow diagrams

KOMBI F

Các sản phẩm khác cùng loại :

Water meter EW370
Model : EW370

Water meter EW120
Model : EW120

Water meter EW171
Model : EW171

Water meter EW130
Model : EW130

Công Ty Cổ Phần Thương Mại Dịch Vụ Và Kỹ Thuật WIN
Địa chỉ : 1047 Lũy Bán Bích, Phường Tân Thành, Quận Tân Phú, Thành Phố Hồ Chí Minh.
Tel : (+84) 838.490.793 - Fax : (+84) 838.490.795 - Email : sales@wincorp.com.vn - Website : www.wincorp.com.vn