CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN

// CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN - vinh dự là nhà phân phối các sản phẩm cơ điện tử - điện lạnh uy tín tại Việt Nam //

Hỗ trợ khách hàng :

0933.707.707 Hỗ trợ trực tuyến :

Mạng Xã Hội:

Tỉ Giá Ngoại Tệ :

Thống Kê Truy Cập :

Users on page

Now online: 1
Hôm Nay: 22
Tuần Này: 140
Tổng Lượt Xem: 29099


( Rê chuột để phóng lớn )

Van cân bằng Kombi-F V6000A

Model : V6000A Series

Xuất Xứ : Liên hệ

Tình Trạng : Liên hệ

Giá Bán : Liên hệ

Bảo Hành : 12 tháng

Để có được giá tốt nhất, quý khách vui lòng liên hệ 0933.707.707 gặp Mr Lãm

MÔ TẢ SẢN PHẨM :

V6000A Kombi-F-II, Kombi-F
FLANGED BALANCING AND SHUTOFF VALVE
WITH SAFECONTM MEASURING CONNECTIONS

Van căn bằng tay Kombi F & F – II, kích thước DN25 đến DN400

Design
• Valve body with flanges PN16 drilled to DIN EN 1092-2
• Valve insert with handwheel and pre-setting display
• 2 SafeConTM measuring connections on DN25…DN400
• Without measuring connections on DN15 and DN20
Materials
• Valve housing made of cast iron GG25 BL1040 / BS1049,
painted blue
• Valve insert made of stainless steel with seat sealing made
of PTFE
• Pressure test cocks made of brass
• Handwheel made of PA6 DN65
• Fairing made of plastic PA6, black
Application
The hydronic balance is a significant requirement for the efficient operation of a hydronic heating or cooling installation. In
an unbalanced system under or over provision of hot water to
individual radiators or circuits can occur. Apart from the correct
selection of radiator valves, regulation of individual circuits is
also necessary and in some cases, such as in DIN 18 380,
VOB part C, required by national standards.
This requirement is met with Kombi-F-II and Kombi-F shutoff
and balancing valves.
Kombi-F-II and Kombi-F have functions shut-off, pre-setting
and measuring.
Features
• Balancing through stroke limitation with digital presetting and visible pre-setting indicator
• Equipped with 2 pressure test cocks for differential pressure measurement (DN25…DN400)
• Non rising spindle with EDD (double sealing system)
• Pre-setting isn`t altered when handwheel is turned
• PTFE-seat sealing
• Spindle made of stainless steel
• Valve body made of corrosion resistant cast iron
• Available in dimensions up to DN400

Specifications
NOTE: The valves are designed for application not influenced by weather.
For application outside or in adverse environments
like corrosion-promoting conditions (sea water,
chemical vapours, etc.) specail constructions or
protective measures are recommended.
Please Note:
• To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial operation
with all valves fully open
• Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
• Please contact us if you should have any special requirements or needs
Medium Water, water-glycol mixture
Operating temperature -10…120°C (14…248°F)
short run 130°C (266°F)
Operating pressure max. 16 bar (232 psi)
kvs (cvs)-value see table below and flow diagrams

Các sản phẩm khác cùng loại :

Water meter EW370
Model : EW370

Water meter EW120
Model : EW120

Water meter EW171
Model : EW171

Water meter EW130
Model : EW130

Công Ty Cổ Phần Thương Mại Dịch Vụ Và Kỹ Thuật WIN
Địa chỉ : 1047 Lũy Bán Bích, Phường Tân Thành, Quận Tân Phú, Thành Phố Hồ Chí Minh.
Tel : (+84) 838.490.793 - Fax : (+84) 838.490.795 - Email : sales@wincorp.com.vn - Website : www.wincorp.com.vn