CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN

// CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN - vinh dự là nhà phân phối các sản phẩm cơ điện tử - điện lạnh uy tín tại Việt Nam //

Hỗ trợ khách hàng :

0933.707.707 Hỗ trợ trực tuyến :

Mạng Xã Hội:

Tỉ Giá Ngoại Tệ :

Thống Kê Truy Cập :

Users on page

Now online: 1
Hôm Nay: 22
Tuần Này: 140
Tổng Lượt Xem: 29099


( Rê chuột để phóng lớn )

Van cân bằng Kombi 3 plus

Model : Kombi 3 Plus V5000-V5010

Xuất Xứ : Liên hệ

Tình Trạng : Liên hệ

Giá Bán : Liên hệ

Bảo Hành : 12 tháng

Để có được giá tốt nhất, quý khách vui lòng liên hệ 0933.707.707 gặp Mr Lãm

MÔ TẢ SẢN PHẨM :

V5000, V5010 Kombi-3-plus BALANCING AND SHUTOFF VALVES

Van căn bằng tay kết hợp với việc đóng mở valve

Overview
The Kombi-3-plus Series consists of the following valves:
• V5000 Kombi-3-plus RED fixed orifice measuring valve
body
• V5010 Kombi-3-plus BLUE double-regulating balancing
valve
A red and a blue Kombi-3-plus are installed as combination in
the supply and return pipeline and can be further upgraded
with the following components:
• V5012 Kombi-DP upgrade kit to convert the V5010 Kombi-
3-plus BLUE into an automatic balancing valve (also see
separate data sheet EN3H-0281GE25)
• Valve body DN10 to DN50 with external threads to ISO228
for use with connections (see Accessories)
• Valve insert with handwheel
• Pre-setting dial and display (V5010 only)
Design
• Valve body DN10 to DN20 with internal threads to
DIN2999 (ISO7) for threaded pipe or copper and precision
steel pipe 10…20 mm (see Accessories), or
• Valve body DN25 to DN80 with internal threads to
DIN2999 (ISO7) for threaded pipe, or
• Valve body DN10 to DN50 with external threads to ISO228
for use with connections (see Accessories)
• Valve insert with handwheel
• Pre-setting dial and display (V5010 only)
Materials
• Valve housing made of red bronze
• Valve insert made of brass with seat sealing made of
PTFE
• O-rings and soft seals made of EPDM
• Handwheel, pre-setting dial and display made of plastic,
red or blue and white
• Connection nuts made of brass
Application
The hydronic balance is a significant requirement for the
efficient operation of a hydronic heating or cooling installation.
In an unbalanced system under or over provision of hot water
to individual radiators or circuits can occur. Apart from the
correct selection of radiator valves, regulation of individual
circuits is also necessary and in some cases, such as in
DIN 18 380, VOB part C, required by national standards.
This requirement is met with Kombi-3-plus Series balancing
valves.
The V5000 Kombi-3-plus RED is a fixed orifice measuring
valve for the supply with additional functions shutoff, draining
and filling.
The V5010 Kombi-3-plus BLUE for the return is a double
regulating balancing valve with additional functions shutoff,
draining and filling.
Together with a V5012 Kombi-DP diaphragm unit the Kombi-
3-plus can be upgraded to an automatic balancing valve –
even after the system has been taken into commission and
under system pressure.
Please Note:
• To avoid stone deposit and corrosion the composition of
the medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial
operation with all valves fully open
• Any complaints or costs resulting from non-compliance
with above rules will not be accepted by Honeywell
• Please contact us if you should have any special
requirements or needs
Features
• All functions of the Kombi-3-plus valves can be installed through the spindle
• V5010 Kombi-3-plus BLUE DN10 to DN40 can be retrofitted with a Kombi-DP diaphragm unit (V5012) – without interrupting operation of the system
• Combination of Kombi-3-plus RED and BLUE allows
measuring in the supply and pre-setting in the return –
at the same time.
• High accuracy of pre-setting because of individual
adjustment
• Robust valve body made of corrosion resistant red
bronze
• Availabe in sizes up to DN80
• Visible pre-setting dial with concealed pre-setting
wheel (V5010 Kombi-3-plus BLUE)
• Maintenance free spindle with double O-ring sealings
• PTFE seat sealing
Specifications
Medium Water or water-glycol mixture
according to VDI 2035
Operating temperature 2…130°C (36…266°F)
Operating pressure max. 16 bar (232 psi)
kvs (cv)-values see table on page 3 and flow
diagrams

V5000-V5010 SECTION jpg V5000-5010 KOMBI 3 BLU jpg

Các sản phẩm khác cùng loại :

Water meter EW370
Model : EW370

Water meter EW120
Model : EW120

Water meter EW171
Model : EW171

Water meter EW130
Model : EW130

Công Ty Cổ Phần Thương Mại Dịch Vụ Và Kỹ Thuật WIN
Địa chỉ : 1047 Lũy Bán Bích, Phường Tân Thành, Quận Tân Phú, Thành Phố Hồ Chí Minh.
Tel : (+84) 838.490.793 - Fax : (+84) 838.490.795 - Email : sales@wincorp.com.vn - Website : www.wincorp.com.vn