CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN

// CÔNG TY CỔ PHẦN THƯƠNG MẠI DỊCH VỤ VÀ KỸ THUẬT WIN - vinh dự là nhà phân phối các sản phẩm cơ điện tử - điện lạnh uy tín tại Việt Nam //

Hỗ trợ khách hàng :

0933.707.707 Hỗ trợ trực tuyến :

Mạng Xã Hội:

Tỉ Giá Ngoại Tệ :

Thống Kê Truy Cập :

Users on page

Now online: 1
Hôm Nay: 24
Tuần Này: 167
Tổng Lượt Xem: 28925


( Rê chuột để phóng lớn )

Pressure reducing valve D15P

Model : D15P

Xuất Xứ : Liên hệ

Tình Trạng : Liên hệ

Giá Bán : Liên hệ

Bảo Hành : 12 tháng

Để có được giá tốt nhất, quý khách vui lòng liên hệ 0933.707.707 gặp Mr Lãm

MÔ TẢ SẢN PHẨM :

D15P
Pressure reducing valve with balanced seat
Standard pattern

VAN GIẢM ÁP

Construction
The pressure reducing valve comprises:
• Housing with PN16 flanges per ISO7005-2, EN1092-2
• Spring bonnet with adjustment screw
• Adjustment spring
• Valve system complete with diaphragm
• Pressure gauge
Materials
• Grey cast iron housing
• Cast iron spring bonnet
• Bronze valve seat
• Bronze piston guide
• Cone up to DN150: brass, DN200: steal
• Spring steel adjustment spring
• EPDM diaphragm
• EPDM seal collar
• EPDM sealing washers
• Stainless steel screws and nuts
Application
Pressure reducing valves of this type protect installations against
excessive pressure from the supply. They can be used for
household, industrial or commercial applications within the range
of their specification.
By installing a pressure reducing valve, pressurisation damage is
avoided and water consumption is reduced.
The set pressure is also maintained constant, even when there is
wide inlet pressure fluctuation.
Reduction of the operating pressure and maintaining it at a
constant level minimizes flow noise in the installation.
Special Features
• Non-rising stem for setting outlet pressure and position indicator on spring bonnet (except for DN200)
• The adjustment spring is not in contact with the potable water
• With inlet and outlet pressure gauge (DN50, DN125, DN150)
or with outlet pressure gauge (DN200)
• Inlet pressure balancing – fluctuating inlet pressure does not
influence outlet pressure
• Powder coated inside and outside – Powder used is physiologically and toxicologically safe
• Reliable and proven
Range of Application
Technical Data
Medium Water, compressed air*, oil free compressed
air* and nitrogen* in consideration of valid
standards (e.g. DIN EN 12502)
Inlet pressure max. 16 bar
Outlet pressure 1.5 – 8 bar – DN50, DN125, DN150
1.5 – 6 bar – DN200
Operating temperature max. 70°C
Nominal pressure PN16
Minimum pressure drop 1,0 bar
Diaphragm pressure
loading
max. 9,0 bar
Nominal size DN50, DN125, DN150, DN200
° As part of an installation being approved according to PED requirements, this product must also be certified

Method of Operation
Spring loaded pressure reducing valves operate by means of a
force equalising system. The force of a diaphragm operates
against the force of an adjustment spring. If the outlet pressure
and therefore diaphragm force fall because water is drawn, the
then greater force of the spring causes the valve to open. The
outlet pressure then increases until the forces between the
diaphragm and the spring are equal again.
The inlet pressure has no influence in either opening or closing of
the valve. Because of this, inlet pressure fluctuation does not
influence the outlet pressure, thus providing inlet pressure balancing.

D15P, jpg

Các sản phẩm khác cùng loại :

Water meter EW370
Model : EW370

Water meter EW120
Model : EW120

Water meter EW171
Model : EW171

Water meter EW130
Model : EW130

Công Ty Cổ Phần Thương Mại Dịch Vụ Và Kỹ Thuật WIN
Địa chỉ : 1047 Lũy Bán Bích, Phường Tân Thành, Quận Tân Phú, Thành Phố Hồ Chí Minh.
Tel : (+84) 838.490.793 - Fax : (+84) 838.490.795 - Email : sales@wincorp.com.vn - Website : www.wincorp.com.vn