




Thống Kê Truy Cập :Users on pageNow online: 2Hôm Nay: 16 Tuần Này: 16 Tổng Lượt Xem: 33460 |
Công tắc áp suất DDCNModel : DDCN Xuất Xứ : Liên hệ Tình Trạng : Liên hệ Giá Bán : Liên hệ Bảo Hành : 12 tháng Để có được giá tốt nhất, quý khách vui lòng liên hệ 0933.707.707 gặp Mr Lãm
MÔ TẢ SẢN PHẨM :D D C M
|
FEMA differential pressure monitors are suitable for monitoring and controlling differential pressures, flow monitoring and automatic control of filter systems. A double chamber system with stainless steel bellows or Perbunan diaphragm detects the difference between the two applied pressures. The desired switching pressure is continuously adjustable within the ranges mentioned in the product summary. All differential pressure monitors can also be used in the vacuum range. The switching differential is not adjustable. SIL 2 according IEC 61508-2 Technical data Pressure connection: Internal thread G 1/4 Switching device Robust housing (200) made of seawater resistant diecast aluminium GD Al Si 12. Protection class IP 54, in vertical position. Pressure sensor materials DDCM014–16: Pressure bellows of 1.4571 Sensor housing of 1.4305. DDCM252–6002: Perbunan diaphragm. Aluminium sensor housing. Mounting position vertically upright. Ambient temperature at switching device –25…+70 °C Max. medium temperature The maximum medium temperature at the pressure sensor must not exceed the permitted ambient temperature at the switching device. Temperatures may reach 85°C for short periods). Higher medium temperatures are possible provided the above limit values for the switching device are ensured by suitable measures (e.g. siphon). Mounting Directly on the pressure line or on a flat surface with two 4 mm Ø screws. Note the connection of pressurized lines: P (+) = high pressure S (–) = low pressure Switching pressure Adjustable from outside with screwdriver. Switching differential Not adjustable. For values see Product Summary.
|
Cảm biến chênh áp FEMA dùng để giám sát và điều khiển độ chênh áp, giám sát dòng chảy và hệ thống lọc. Một hệ thống buồng kép với lá thép không gỉ ở giữa hoặc ron chắn giúp phát hiện sự chênh lệch áp suất. Sự chuyển đổi áp suất được hiệu chỉnh liên tục nằm trong khoảng thông số sản phẩm. tất cả các đầu dò chênh áp được đặt trong chân không, sự chênh lệch áp suất không thể hiệu chỉnh được
Thống số kỹ thuật -Đấu nối: ren trong G 1/4 -Thiết bị chuyển mạch Lớp vỏ bọc bằng nhôm chống nước biển GD Al Si 12. Cấp bảo vệ IP 54 ở vị trí thẳng đứng. Vật liệu cảm biến DDCM014–16: Vật liệu ống thổi áp lực 1.4571 Vật liệu vỏ cảm biến 1.4305 DDCM252–6002: – Ron Vỏ nhôm. Gắn ở vị trí thẳng đứng Nhiệt độ môi trường –25…+70 °C – Nhiệt độ tối đa: có thể lên đến 85°C (trong thời gian nắng). – Lắp đặt Lắp trực tiếp lên đường ống hoặc ở bề mặt phẳng với 2 ốc 4 mm Ø. Lưu ý: kết nối ở đường ống: P (+) = high pressure S (–) = low pressure Điều chỉnh dải đo với tuốc nơ vít
|